Proper operation of buried scraper chain conveyor drag chain conveyor

December 01, 2020

Proper and skilled operation of the buried Scraper Conveyor can not only improve work efficiency, but also ensure the safety of the operator and reduce safety accidents. The precautions for operation of the scraper conveyor should be affixed to the position easily visible to the operator and always remind the correct use of the scraper conveyor.
1. The scraper conveyor driver shall be trained and certified, take charge of the knowledge of the structure and performance of the scraper conveyor, know how to operate, and regularly maintain the machine.
2. When the driver receives the start signal from the tail end, he must contact the pre-equipment to determine whether the pre-equipment is operating normally.
3. Check the equipment and check if there are no problems before starting to drive.
4. Perform jogging operation on the equipment. After the jogging, there is no problem and normal operation can be performed.
5. During the operation of the equipment, the driver should pay attention to the observation at any time. If the abnormality is abnormal, it should be handled in time. The temperature of the machine bearing should not exceed 75 degrees Celsius. For the chain, pay attention to whether the chain, card chain or skip chain phenomenon.
6. If the machine is abnormal, it should be stopped immediately and can be continued after troubleshooting.
7. After the machinery and equipment are shut down, the driver should clean up the machinery and equipment, and record the problems in the operation of the machinery and equipment for future reference.
8, maintenance should be carried out in the case of power failure, and hang warning signs.
9. Do not start the device frequently to avoid damage to the device.
10, if the driver is not very clear on the signal, then you can not boot operation.
11. The handover work should be done well. The necessary handover should be clear and the handover record should be made.
12. Before stopping the machine, the material on the conveyor should be emptied to avoid starting the load of the conveyor.

Author:

Mr. Jacky Guo

E-mail:

sales01@everluckymachinery.com

Phone/WhatsApp:

+86 13722852356