Belt conveyor belt skid solution reference

1. Heavy hammer tension belt conveyor belt slip The belt conveyor of the weight tension device can be added to solve the problem when the belt slips. It can be added to the belt without slipping. However, it should not be added excessively so as not to subject the belt to unnecessary excessive tension and reduce the service life of the belt.
2. Spiral Tensioning or Hydraulic Tensioning Slipping of a Belt Belt Tension can be increased by adjusting the tension stroke when a belt tensioner or hydraulically tensioned belt conveyor slips. However, sometimes the tensioning stroke is not enough and the belt is permanently deformed. At this time, the belt can be cut off and re-cured.
3. The use of nylon belt or EP requires a long tensioning stroke. When the stroke is not enough, it can be re-vulcanized or the tensioning stroke can be increased to solve the problem.
phone