Botou Ever Lucky Environmental Protection Machinery Co., LTD
$3500≥1Bag/Bags
| Payment Type: | L/C,T/T,D/P,Paypal,Money Gram,Western Union |
| Incoterm: | FOB,CFR,CIF,EXW,FCA,CPT,CIP |
| Min. Order: | 1 Bag/Bags |
| Transportation: | Ocean,Land |
| Port: | Tianjin |
Model No.: φ800*2500mm
Brand: JY
Medium Material: Chemical Synthetic Fiber
Dust Collecting Method: Wet
Type: Filter Cartridge Dust Collector
Air Volume: 2000-30000m3/h
Power: 0.75-5kw
Height: 3500-6000mm
Diameter: 800-2500mm
| Selling Units | : | Bag/Bags |
| Package Type | : | wooden case |
The file is encrypted. Please fill in the following information to continue accessing it
Waste gas absorption tower is one of the waste gas treatment equipment.Exhaust gas is introduced into the spray tower by the fan, the inner cylinder forms a pressure chamber, and the pressure chamber is evenly distributed to each bubbling tube. The exhaust gas passes through the bubbling tube and enters the liquid absorption tank to absorb bubbling liquid, and then bubbles pass through the packing layer. The gas-liquid two phases are fully in contact with the absorption neutralization reaction. The water is sprayed on the top of the tower after being pressurized by the water pump at the bottom of the tower, and finally it is returned to the bottom of the tower for recycling, and the exhaust gas after absorbing and filtering continues to flow upwards and is sprayed. The absorption neutralization liquid ejected by the tube produces a final reaction. After neutralization reaction, the gas after dehydration and dust removal by the terminal defogging plate is discharged into the atmosphere, which can also be combined with photo-oxygen catalysis or low-temperature plasma and activated carbon gas purification equipment. After-exhaust gas reaches local or national emission standards and emission requirements. More products, Industrial Dust Collector, baghouse dust collector, Slide gate valve, Flap valve, Butterfly valve, Screw flight, Screw conveyor
Pictures of product
Structure
The packing layer in the spray tower is used as a mass transfer device for the gas-liquid two-phase contact member. A packing support plate is installed at the bottom of the packing tower, and the packing is placed on the supporting plate in a random manner. A packing pressure plate is installed above the packing to prevent it from being blown by the updraft. The spray liquid from the spray tower sprays from the top of the tower to the filler through the liquid distributor, and flows down along the surface of the filler. The gas is sent in from the bottom of the tower, and after being distributed by the gas distribution device, it passes through the gap of the packing layer in a countercurrent flow with the liquid. On the packing surface, the two phases of gas and liquid are in close contact for mass transfer. When the liquid flows downward along the packing layer, a wall flow phenomenon sometimes occurs. The wall flow effect causes the gas and liquid phases to be unevenly distributed in the packing layer, thereby reducing the mass transfer efficiency. Therefore, the filling layer in the spray tower is divided into two sections, and a redistribution device is arranged in the middle to spray on the lower filling layer after redistribution.
Features
1.Dust removal and desulfurization efficiency is high. When alkaline washing water is used, the desulfurization efficiency can reach 85%
2. The equipment occupies less land and is easy to install
3. Low water and power consumption indicators
4. Corrosion resistance, no wear, and long service life
5. Reliable equipment operation, simple and convenient maintenance
Installation
1. Regulation of circulating water volume: It is determined by the spray tower water supply pump. When one boiler is running, one can be turned on. When two or three are running at the same time in winter, both water pumps are turned on, and the mud pump is at its flow rate. It should be adjusted according to the flow of the circulating pump to make them equal
2. Dosing volume in the dosing tank in the spray tower: When operating a boiler, add 2 bags of alkali and 5 bags of slaked lime. If two or three units are operated in winter, the dose can be increased by a corresponding multiple
3. The spray tower sedimentation tank should be cleaned frequently, once a week in summer and once every three days in winter
4. When the gray water separator discharges sewage, it is discharged once per shift, and the sewage valve should be opened separately until clear water is discharged
5. The above rotating parts should be frequently checked and filled with oil, and the faults should be eliminated in time to ensure the desulfurization effect of the spray tower
6. Pay attention to safety when adding medicine on the stairs and down stairs, and have independent security and mutual security awareness
7. After the work is completed, the sanitation should be cleaned up in time so that people can clear the site
Applications
More products:
Baghouse Dust Collector, Cyclone Dust Collector, Welding Fume Extractor, Fog Cannon, Bulk Material Handling Equipment
About Us
Related Products List
Contact Us
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Contact Now