Bag filters dust collector Baghouse structures

1. Bag-type dust collector plate-type shell structure The dust-collector shell is surrounded by flat plate members. This type of structure box can be pre-prepared in our company, and then assembled with temporary bolts at the construction site, and then welded together. The bag-type dust collector plate structure, usually in the height direction, such as the length of the bag is less than 6 meters, can be a piece to the top, such as the use of 10 meters long bag can be divided into two sections, and then in the cloth bag house should be added inside the box.
2. Bag filter frame type shell structure The filter bag room box body of this type of structure is composed of columns and beams. Columns are set around the box, and there are multiple cross beam connections between the columns, and then the wall is attached to the beams to form a closed Enclosure of the box. The advantage of the upper box structure is that there is no support inside the box, and more filter bags can be arranged. The clearance between the filter bags is larger, the air permeability is better, and the inspection is also convenient. The box of the entire bag filter Stronger, more rigid, but the disadvantage is the greater consumption of steel, increase the weight of equipment.
3. The structure of the bag filter cylinder structure is considered most suitable from the standpoint of structural science and operational safety, especially when designing the bag filter into a cylindrical shape in a pressure-resistant place. From the present situation, a small bag filter and a combustible gas are used. Bag filter is often designed into a cylindrical shape, such as bag filter for blast furnace gas.