Home> Blog> Bag filter fire and explosion precautions measures

Bag filter fire and explosion precautions measures

November 23, 2021

Introduction: The bag dust collector is currently the most widely used dust removal equipment in the dust removal industry. In some special industries, the dust is flammable and explosive. Therefore, we need to carry out some special treatment on the bag filter to achieve the purpose of fire prevention and explosion protection. City Zhicheng Dedusting Equipment Co., Ltd. will explain the precautions of fireproof and explosion protection of bag filter.

1. If the gas to be treated is high-temperature gas, use a high-temperature, non-flammable Dust Filter Bag.

2. When dealing with flammable and explosive dust, dust filter bags use high temperature or non-flammable materials.

3. For dust removal systems where there is a risk of burning or explosion dust and flammable debris, use a dust collector that does not generate sparks and static electricity.

4. Dust that can form an explosive mixture when in contact with water. Wet dust removal equipment cannot be used.

5. Set a combustion chamber or Mars trap in front of the bag filter to completely burn unburned dust and gas or trap Mars.

6. The use of explosion-proof motor equipment, the treatment of combustible gases must be installed alarm and automatic parking system.

7. Pay attention to the cleanliness of the workshop and prevent the accumulation of dust in the workshop and dust inside the dust collector so as to avoid spontaneous combustion and explosion of the dust.

8. Set explosion-proof pressure relief vents at the necessary places of the dust removal system to prevent explosions due to excessive pressure. Install lightning protection measures outdoors and install lightning rods.

9. To prevent the sundries in the airflow from hitting the impeller and the casing, sparks must be installed behind the dust collector.

10. The use of measures to prevent static electricity from accumulating for the bag filter shall be added. Each part shall be grounded with a conductive material, or a conductive fiber may be added during the manufacture of the filter material.

Information Source: Botou City Haocheng Dedusting Equipment Co., Ltd.

Contact Us

Author:

Mr. Jacky Guo

Phone/WhatsApp:

8613722852356

Popular Products
Company News
You may also like
Related Information
Attention when choosing bag filter dust collectors

For many companies that require dust removal from their factory buildings, construction sites, etc., they must select the appropriate performance and type of dust collector. For different use...

Excessively high operating resistance of pulse bag filter

Pulse bag filter generally uses compressed air for cleaning and cleaning. The compressed air contains more oil, water and impurities. If it is directly injected into the filter bag without...

Technical Analysis of pulse bag filter debugging and maintenance and overhaul

In recent years, the air pollution control caused the concern of all walks of life, this article will introduce the pulse bag filter debugging and maintenance, involving the pulse bag filter...

Application of bag filter in ventilation and dust removal of low frequency induction furnace

In the process of copper pipe manufacturing, zinc oxide is generated along with the production of copper, and if a large amount of zinc oxide dust is not treated, it will lead to flying in the sky....

Related Categories

Email to this supplier

Subject:
Email:
Message:

Your message must be betwwen 20-8000 characters

Contact Us

Author:

Mr. Jacky Guo

Phone/WhatsApp:

8613722852356

Popular Products
Company News
We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send